D175 Marine Gauge
D175
NMEA 2000® 1.75″ AMOLED engine gauge. It shows one of ten engine values at a time, for port and starboard engines, and is set up on the gauge itself, without an app.
Features
NMEA 2000 input: reads engine and battery data from the network and finds its sources by itself
Analog in, NMEA 2000 out: reads conventional senders and puts the values on the network, so the chartplotter shows them too
Fits a standard 52 mm hole, the common 2-1/16″ gauge cutout: replaces an old gauge without cutting the dash
Alarm with built-in buzzer: warning and alarm limits on every value, the ring turns red and the buzzer sounds
Shared brightness: all gauges on the network dim together
Standard NMEA 2000 Micro-C connector, powered from the network
Display
1.75″ round AMOLED, touch
Mounting
Standard 52 mm (2-1/16″) hole
Network
NMEA 2000, Micro-C connector
Power
From the NMEA 2000 network
Inputs
Analog senders, out to NMEA 2000
Alarm
Built-in buzzer
What it shows
Port and starboard engines.
Set up on the gauge
No app needed.
01
Hold
Keep a finger on the gauge until it steps back.
02
Swipe
Left or right picks the value. Up or down picks the engine.
03
Let go
Locks in after 2 seconds and keeps the setting.